Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 435)

Fabric OS Message Reference 413
53-1003140-01
FICN-1009
5
FICN-1009
Message
DevIng:CmdReject Sense Data rcvd:Path=0x
DeviceDomain> LastCmds=0x
issued to the device> Sense Data:Bytes0-0xB=0x
device>
the device>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Unit Check status was received from a device and a sense command was issued to read the
sense data.
Recommended
Action
If there was a job failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1010
Message
DevDiskEgr:Device level exception flag found for Path=0x
HostPort DeviceDomain>: Oxid=0x
was reported in the Device Level Exception Frame>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a Device Level Exception frame was received from the FICON channel.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1011
Message
DevDiskIng:XRC Incorrect RRS SeqNum Rcvd Path=0x
DeviceDomain> Expected=0x
number that was expected from the device> Received=0x
was actually received from the device> Oxid=0x.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the Control unit or device presented a Read Record Set Sequence number different from the
SDM's expected sequence number.
Recommended
Action
If there was an XRC volume or session suspended associated with this event, contact your vendor's
customer support for assistance.