Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 466)

444 Fabric OS Message Reference
53-1003140-01
FICN-1100
5
FICN-1100
Message
HostTeraIng:FICON Selective Reset:Path=0x
DeviceDomain> Elapsed Time=
seconds since the last IO started for this device>.
since the last IO started for this device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that protocol errors in emulation in the Control Unit or network errors can cause Selective
Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1101
Message
HostTeraIng:FICON Purge received:Path=0x
DeviceDomain>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1102
Message
HostTeraIng:LRJ received on Path=0x
DeviceDomain> lastCmds=0x
received from the channel for this device> lastStatus=0x
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel believes that it no
longer has a path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.