Sec-3001, Sec-3002, Sec-3003 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 838
816
Fabric OS Message Reference
53-1003140-01
SEC-3001
5
SEC-3001
Message
Event: or Disabled> on the fabric. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the security mode of the fabric was either enabled or disabled. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the SEC-3002 Message Event: Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates the specified security event has occurred. The event can be one of the following: • There has been a fabric configuration server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the SEC-3003 Message Event: member(s) Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates a new security policy with entries has been created. When you use a wildcard (for example, an
security event was not planned, take appropriate action as defined by your enterprise security policy.
security event was not planned, take appropriate action as defined by your enterprise security policy.
asterisk) in creating a policy, the audit report displays the wildcard in the event information field.