Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 844)

822 Fabric OS Message Reference
53-1003140-01
SEC-3018
5
SEC-3018
Message
Event: , Status: success, Info: Parameter [] changed
from [] to [].
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified password configuration parameter is changed.
Recommended
Action
Verify the password configuration parameter was intentionally changed. If the password configuration
parameter was intentionally changed, no action is required. If the password configuration parameter was
not intentionally changed, take appropriate action as defined by your enterprise security policy.
SEC-3019
Message
Event: , Status: success, Info: Passwdcfg parameters set to default
values.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the password configuration parameters are set to default values.
Recommended
Action
Verify the password configuration parameter was intentionally set to default values. If the password
configuration parameter was intentionally set to default values, no action is required. If the password
configuration parameter was not intentionally set to default values, take appropriate action as defined by
your enterprise security policy.
SEC-3020
Message
Event: , Status: success, Info: Successful login attempt via
.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates a successful login occurred. An IP address is displayed when the login occurs over a remote
connection.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.