Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 470)

448 Fabric OS Message Reference
53-1003140-01
FICN-1112
5
FICN-1112
Message
DevPrintIng:Auto Sense Data received on Path=0x
DeviceDomain> Bytes0-0xB=0x
data from the device>
sense data from the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON Printer write pipelining processed sense data from a FICON device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1113
Message
DevPrintIng:LRJ received on Path=0x
DeviceDomain> lastCmds=0x
received from the channel for this device> lastStatus=0x
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a
path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
FICN-1114
Message
DevPrintIng:Device level exception found for Path=0x
HostPort DeviceDomain>: Oxid=0x
the frame that included the Device Level Exception>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active emulation device delivered a Device Level Exception frame to the emulation
processing.
Recommended
Action
If there was an unexpected job failure or I/O Error associated with this event, contact your vendor's
customer support for assistance.