Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 472)

450 Fabric OS Message Reference
53-1003140-01
FICN-1118
5
FICN-1118
Message
HostPrintIng::FICON Selective Reset:Path=0x
DeviceDomain> state=0x
state for this device> LastCmds=0x
for this device> LastStatus=0x
for this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1119
Message
HostPrintIng:FICON Selective Reset:Path=0x
DeviceDomain> Elapsed Time=
seconds since the last IO started for this device>.
since the last IO started for this device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1120
Message
HostPrintIng:FICON Purge received:Path=0x
DeviceDomain>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during FICON path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.