Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 471)

Fabric OS Message Reference 449
53-1003140-01
FICN-1115
5
FICN-1115
Message
HostPrintEgr:CmdReject Sense Data Rcvd:Path=0x
DeviceDomain> LastCmds=0x
received from the channel for this device> SenseData:Bytes0-0xB=0x
sense data from the device>
of sense data from the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an active Print emulation sequence received Command Reject Sense data from the device.
Recommended
Action
If there was an unexpected job failure or I/O error associated with this event, contact your vendor's
customer support for assistance.
FICN-1116
Message
HostPrintEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x
HostPort DeviceDomain> LastCmd=0x
commands issued to this device from the channel> LastStatus=0x
values sent to the channel from this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a Link Level Reject (LRJ) was received from a device indicating that the Control Unit has
lost the logical path to the Logical Partition (LPAR).
Recommended
Action
If this was an unexpected event; contact your vendor's customer support for assistance.
FICN-1117
Message
HostPrintIng:FICON Cancel received Path=0x
DeviceDomain> state=0x
state for this device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a job was canceled during Print write pipelining.
Recommended
Action
If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer
support for assistance.