Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 477)

Fabric OS Message Reference 455
53-1003140-01
FICU-1001
5
FICU Messages
FICU-1001
Message
.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that one of the configuration management functions have failed. The key variable is a
component of the Fabric OS configuration database and is for support use only. The error variable is an
internal error number.
Recommended
Action
Execute the haFailover command on the switch if it has redundant control processors (CPs) or reboot
the switch. Execute the switchStatusShow command to check if the flash memory is full. If the flash
memory is full, execute the supportSave command to clear the core files.
FICU-1002
Message
: Failed to get RNID from Management Server Domain=
rc=.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch
request node ID (RNID) from the management server because of a Fabric OS problem. The domain
variable displays the domain ID of the target switch for this RNID. The error variable is an internal error
number.
Recommended
Action
If this is a bladed switch, execute the haFailover command. If the problem persists, or if this is a
non-bladed switch, download a new firmware version using the firmwareDownload command.
FICU-1003
Message
: FICON-CUP License Not Installed: ().
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the fibre connectivity control unit port (FICON-CUP) license is not installed on the switch.
Recommended
Action
Execute the licenseShow command to check the installed licenses on the switch. The switch cannot be
managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch
supplier for a FICON-CUP license. Execute the licenseAdd command to add the license to your switch.