Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 893)

Fabric OS Message Reference 871
53-1003140-01
SS-1006
5
SS-1006
Message
supportsave not collected for slot . Reason: blade was not available
to accept a supportsave request.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the supportsave request was not sent to the blade in the specified slot.
Recommended
Action
Restart the switch using the reboot command and then execute the supportSave command.
SS-1007
Message
supportsave failed for the slot . Reason: No response from the blade
in the specified slot for the given supportsave request.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there was no response from the blade in the specified slot for the given supportsave
request.
Recommended
Action
Restart the switch using the reboot command and then execute the supportSave command.
SS-1008
Message
supportsave failed for the slot . Reason: BP supportsave timeout.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified slot has taken more time than expected to collect the supportsave logs.
Recommended
Action
Execute the supportSave command again.