Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 705)

Fabric OS Message Reference 683
53-1003140-01
NBFS-1001
5
NBFS Messages
NBFS-1001
Message
Duplicate E_Port SCN from port in state (
change number>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a duplicate E_Port state change notification (SCN) was reported. The neighbor finite state
machine (NBFSM) states are as follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
Recommended
Action
No action is required.
NBFS-1002
Message
Wrong input: to neighbor FSM, state , port
.
Message Type
FFDC | LOG
Severity
ERROR
Probable Cause
Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Action
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is
Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.