Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 657)

Fabric OS Message Reference 635
53-1003140-01
L2SS-1004
5
L2SS-1004
Message
FDB error: Error in creating AVL tree.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Layer 2 system (L2SYS) has encountered an error while initializing the AVL tree.
Recommended
Action
Reboot or power cycle the switch.
L2SS-1005
Message
MAC-address-table hash failed even after two attempts for slot chip .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the media access control (MAC) address table hash failed even after two hash changes on
the specified chip.
Recommended
Action
Reboot or power cycle the switch.
L2SS-1006
Message
MAC-address-table table on slot chip is 95 percent full.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the media access control (MAC) address table on the chip is 95 percent full.
Recommended
Action
Clear some of the entries using the no mac-address-table static command or wait until the old entries
age out.