Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 170)

148 Fabric OS Message Reference
53-1003140-01
AN-1004
5
Recommended
Action
If the port is an F_Port, examine the connected device for the source of the latency. If the port is a
long-distance E_Port, make sure that there are enough buffer credits to service the link distance.
AN-1004
Message
Congestion bottleneck on port /.
pct. of
period over which the percentage of affected seconds is reported> secs. affected.
Message Type
LOG | AUDIT
Class
FABRIC
Severity
WARNING
Probable Cause
Indicates that the volume of outgoing traffic at the specified port is too high for the capacity of the link.
Recommended
Action
Add more capacity on the path, using trunk links if possible.
AN-1005
Message
Slot , port has
bottleneck cleared.
Message Type
LOG | AUDIT
Class
FABRIC
Severity
INFO
Probable Cause
Indicates that the bottleneck condition on the specified port has cleared.
Recommended
Action
No action is required.
AN-1006
Message
Bottleneck detection configuration is successfully changed.
Message Type
AUDIT
Class
FABRIC
Severity
INFO
Probable Cause
Indicates that the bottleneck detection configuration has been changed.
Recommended
Action
No action is required.