Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 342)

320 Fabric OS Message Reference
53-1003140-01
ESM-1003
5
ESM-1003
Message
ESMd uninitialization called for service :.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that ESMd service uninitialization phase has completed.
Recommended
Action
No action is required.
ESM-1004
Message
ESMd failed to initialize rc:.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified module has failed to initialize.
Recommended
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
ESM-1005
Message
Configuration () replay failed - .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified configuration failed to be reapplied during config replay.
Recommended
Action
Use the portCfg, portShow, and portCfgShow commands to correct the cause of the failure.
ESM-1010
Message
DP is OFFLINE.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified Data Processor (DP) has went offline.