Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 465)

Fabric OS Message Reference 443
53-1003140-01
FICN-1097
5
FICN-1097
Message
HostTeraEgr:AS Link Level Reject (LRJ) from CU Rx Path=0x
HostPort DeviceDomain> LastCmd=0x
commands issued to this device from the channel> LastStatus=0x
values sent to the channel from this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a Link Level Reject (LRJ) received from a device indicates that the Control Unit has lost the
logical path to the Logical Partition (LPAR).
Recommended
Action
If this was an unexpected event; contact your vendor's customer support for assistance.
FICN-1098
Message
HostTeraIng:FICON Cancel received Path=0x
DeviceDomain> state=0x
state for this device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a job was canceled during a Write Tape Pipelining.
Recommended
Action
If this was an unexpected event (cancel is normally an operator event), contact your vendor's customer
support for assistance.
FICN-1099
Message
HostTeraIng::FICON Selective Reset:Path=0x
DeviceDomain> state=0x
state for this device> LastCmds=0x
for this device> LastStatus=0x
for this device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.