Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 712)

690 Fabric OS Message Reference
53-1003140-01
NS-1013
5
NS-1013
Message
SIM_PORT with WWPN[] creating duplicate condition with PID 0x
device PID>. Removed PID 0x and disabled port
Port>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the SIM port that is causing the duplicate condition has been removed from the Name
Server database and the port is disabled.
Recommended
Action
Verify the device reported with duplicate World Wide Port Name (WWPN) and re-enable the port if
necessary.
NS-1014
Message
Domain Capability is not available for domain . Rejoin this domain to the
fabric. Reason Code .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that domain capability is unavailable for the specified domain.
Recommended
Action
Remove and rejoin the specified domain to the fabric.
NS-1015
Message
Failed to update client capability to ESS (Exchange Switch Support) after maximum
number of retries - return code . Failing sync dump to standby
CP.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that Exchange Switch Support (ESS) is unable to update its capability. Failed to send the sync
dump to standby control processor (CP).
Recommended
Action
Verify that HA synchronization has failed using the haShow command. If HA synchronization has failed,
execute the haSyncStart command on active CP to resynchronize the HA state.