Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 481)

Fabric OS Message Reference 459
53-1003140-01
FICU-1013
5
FICU-1013
Message
Host data file cannot be reset to proper size.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the file system is too full to create the host data file at the proper size.
Recommended
Action
Execute the switchStatusShow command to check if the flash memory is full. If the flash memory is full,
execute the supportSave command to clear the core files.
FICU-1017
Message
FMSMODE enable failed because reserved area is bound to a device.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that one or both of the reserved areas 0xFE and 0xFF is bound to a device.
Recommended
Action
Execute the wwnaddress --show command to display all devices currently bound to areas. Execute the
wwnaddress --unbind command to release the reserved area from the device.
FICU-1018
Message
FMSMODE enable noticed swapped ports.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that some ports are swapped at the time FICON Management Server mode (fmsMode) is
enabled.
Recommended
Action
Verify the expected FICON port address and port number relationship. For more information, refer to the
"FICON and FICON CUP in Virtual Fabrics" section of the FICON Administrator's Guide.