Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 532)

510 Fabric OS Message Reference
53-1003140-01
FW-1182
5
FW-1182
Message
, is above high boundary(High=, Low=).
Current value is .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has risen
above the high boundary. This error generally indicates a deteriorating fabric hardware.
Recommended
Action
Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
FW-1183
Message
, is between high and low boundaries(High=,
Low=). Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has
changed from a value outside of the acceptable range to a value within the acceptable range. Frequent
fluctuations in CRC errors generally indicate an aging fabric.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Check your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
FW-1184
Message
, value has changed(High=, Low=).
Current value is .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.