Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 378)

356 Fabric OS Message Reference
53-1003140-01
FABS-1001
5
FABS Messages
FABS-1001
Message
.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that the system is low on memory and cannot allocate more memory for new operations. This is
usually an internal Fabric OS problem or file corruption. The Description of memory need variable
specifies the memory size that was being requested. The value can be any whole number.
Recommended
Action
Reboot or power cycle the switch.
FABS-1002
Message
.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal problem has been detected by the software. This is usually an internal Fabric
OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1004
Message
process (
command name>) .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.