Sec-3033, Sec-3034, Sec-3035 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 849
Fabric OS Message Reference
827
53-1003140-01
SEC-3033
5
SEC-3033
Message
Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set
to
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified event has occurred.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-3034
Message
Event: aaaconfig, Status: success, Info: Authentication configuration changed
from not>. Message Type AUDIT Class SECURITY Severity INFO Probable Cause Indicates an authentication configuration has changed. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the SEC-3035 Message Event: ipfilter, Status: success, Info: saved. Message Type AUDIT | LOG Class SECURITY Severity INFO Probable Cause Indicates the specified IP filter policies has been saved. Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
security event was not planned, take appropriate action as defined by your enterprise security policy.