Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 361)

Fabric OS Message Reference 339
53-1003140-01
FABR-1001
5
FABR Messages
FABR-1001
Message
port , .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified switch port is isolated because of a segmentation resulting from mismatched
configuration parameters.
Recommended
Action
Based on the segmentation reason displayed with the message, look for a possible mismatch of relevant
configuration parameters in the switches at both ends of the link.
Run the configure command to modify the appropriate switch parameters on both the local and remote
switch.
FABR-1002
Message
fabGaid: no free multicast alias IDs.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the fabric does not have any available multicast alias IDs to assign to the alias server.
Recommended
Action
Verify alias IDs using the fabricShow command on the principal switch.
FABR-1003
Message
port : ILS bad size , wanted
payload size>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that an internal link service (ILS) information unit of invalid size has been received. The
neighbor switch has sent a payload with an invalid size.