Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 876)

854 Fabric OS Message Reference
53-1003140-01
SPM-1001
5
SPM Messages
SPM-1001
Message
Init fails: .
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the security processor management (SPM) failed to initialize.
Recommended
Action
Check the system resources and restart the switch.
SPM-1002
Message
Generic SPM Warning: .
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an security processor management (SPM) warning based on the reason displayed.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
SPM-1003
Message
Set New Group Cfg SC Enable KV Type .
Message Type
LOG
Severity
INFO
Probable Cause
Indicates a new group has been configured.
Recommended
Action
No action is required.