Nortel Networks NN43001-106 - Manual (Page 91)

Feature operation 91
Dependency:
• Flexible Feature Codes (FFC) package 139
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 17 – Modify the system hardware and software parameters to
enable or disable the 16-Button Digito" (page 91)
2. "LD 18 – Create or modify data for this feature in the 16-Button DTMF
Data block." (page 91)
LD 17 - Modify the system hardware and software parameters to enable or disable the 16-Button
Digitone/Multifrequency Operation feature.
Prompt Response Description
REQ NEW CHG Add, or change.
TYPE PARM System Parameters.
...
PARM (NO) YES (No) Change to system parameters.
- ABCD (NO) YES 16-Button DTMF (is not) is enabled.
LD 18 - Create or modify data for this feature in the 16-Button DTMF Data block.
Prompt Response Description
REQ NEW CHG Add, or change.
TYPE ABCD 16-Button DTMF data.
...
Feature operation
Each button (A, B, C, D, * and #) can have up to three functions assigned to
it. The function accessed when a key is pressed is determined by the mode
of operation (pre-dial, post-dial or control mode). Functions are assigned
to keys by way of overlay programs. The functions can be either Flexible
Feature Code functions or the autodial function. An autodial number (of up
to 23 digits) can be assigned to any of these buttons for either the pre-dial
or post-dial modes. In addition, an autodial number can be assigned to the
recall (RCAL) button in the pre-dial mode.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.