Nortel Networks NN43001-106 - Manual (Page 478)

478 Automatic Wake Up FFC Delimiter
When activated, this feature provides the user with a response from the
system. The response is silence or confirmation by means of a tone or
a recorded announcement.
Operating parameters
The feature is applicable to all systems.
If the user enables the delimiter option without enabling the standard time
entry option, all four digits (H1H2M1M2) and an octothorpe (#) must be
entered for a valid entry.
An octothorpe (#) is the only delimiter accepted to indicate the end of time
entry. This delimiter is not programmable.
Feature interactions
Background Terminal
When changes to the wake up timer are initiated by the Background
Terminal or user, the wake up time previously entered last is overridden.
An octothorpe (#) is not required when entering the Wake up time from a
background terminal.
Call Detail Recording
No Call Detail Recording report is generated for Automatic Wake Up calls.
Directory Numbers - Multiple Appearance
For Multiple Appearance Directory Numbers, wake up information is stored,
deleted and queried from a DN’s first primary appearance terminal number.
Directory Number - Prime
Release Key
Pressing the Prime Directory Number or Release key, when programming a
Wake up request, cancels the programming sequence. If an invalid timer
is entered, the user hears an error tone. If another feature key is pressed
during programming, it is ignored by the system.
Room Status
When a guest has either checked in or out, the room status changes. If
an AWU request is still active, it is canceled if it is included as part of the
Check In/Out option.
Feature packaging
Automatic Wake Up FFC Delimiter requires Flexible Feature Codes (FFC)
package 139. The following packages are also required:
• Recorded Announcement (RAN) package 7
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.