Nortel Networks NN43001-106 - Manual (Page 199)

Feature Interactions 199
End-to-End Signaling
While in the Attendant Administration mode, pressing the Attendant
End-to-End Signaling key is ignored.
Hot Line
Use of an attendant console to change the database for Enhanced Hot
Line is not supported.
ISDN Calling Line Identification Enhancements
Administration of a Calling Line Identification entry, for a telephone from an
attendant console, is not supported.
Multiple Appearance Directory Number Redirection Prime
Multiple Appearance Directory Number Redirection Prime (MARP) TNs
cannot be added, moved, or deleted with Attendant Administration. The DN
information that displays on the console includes the MARP designation
if applicable.
Attendant Administration activities, like changing key assignments or DN
appearance, can change MARP TN assignments. If so, the CSC102
message appears on the teletype (TTY) indicating a new default MARP
TN, as follows:
CSC102 DN nnnn NEW MARP l s c u (c u)
where
nnnn = the DN associated with the MARP TN
l s c u (c u) = the new MARP TN assigned to DN nnnn (c u for Small
Systems)
Multi-Party Operations
Attendant Administration allows certain station Classes of Service to be
altered. The operation of Attendant Administration is modified so that if an
attendant tries to alter either XFA or XFD Class of Service, then Three-party
Service (TSA) Class of Service is disallowed. The TSA and XFA Classes
of Service are mutually exclusive. When XFA is assigned, TSA will be
disallowed if it was not configured. XFD is not mutually exclusive with
TSA, but TSA will not be automatically assigned if the Class of Service
is changed to XFD. TSA Class of Service cannot be assigned through
Attendant Administration.
This feature can not be used to setup the Three-party Service TSA Class of
Service.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.