Nortel Networks NN43001-106 - Manual (Page 445)

Operating parameters 445
A telephone’s successful relocation is indicated by a 180-millisecond buzz
through the telephone’s loudspeaker, not a tone through the handset. The
buzz occurs after the telephone is plugged into the new location, and the
parameter download to the Meridian Modular Terminal is complete.
Modify the relocation table
The relocation table contains information regarding the telephone’s serial
number, Terminal Number, and terminal identification. When a telephone is
relocated OUT, the table maintains the necessary telephone information.
When the telephone is relocated IN, the system searches the table for
that telephone’s information. When the information is found, the data is
moved to the new location. The telephone data is then removed from the
relocation table.
Through LD 50, the serial number or any terminal ID information may be
modified while the telephone is relocated out (before it has been relocated
back in). For example, use LD 50 when replacing a telephone with another
one of the same type with a different serial number or terminal ID, but the
same key configuration.
LD 21 prints information about telephones that have been relocated out.
The IDU (ID for Unit) command in LD 32 determines the telephone’s serial
number and ID information.
Operating parameters
A single-line telephone must be relocated to a vacant position on an analog
(500/2500 type) Line Card.
A digital telephone must be relocated to a vacant position on a Digital Line
Card (DLC) or Integrated Services Digital Line Card (ISDLC) in the switch.
Moving a telephone from an off-premise to on-premise location or vice versa
is not recommended, as incorrect pad values on connections may result.
A Manual Line telephone cannot be relocated using the Automatic Set
Relocation feature.
The relocation table allows a maximum of 32 telephones to be relocated
out at one time.
A relocated out telephone cannot be relocated in to an already defined TN.
A telephone being relocated in must be plugged into a TN location that
currently has no assigned telephone information.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.