Nortel Networks NN43001-106 - Manual (Page 229)

229
Attendant Barge-In
Contents
This section contains information on the following topics:
"Feature description" (page 229)
"Operating parameters" (page 229)
"Feature interactions" (page 230)
"Feature packaging" (page 231)
"Feature implementation" (page 231)
"Feature operation" (page 233)
Feature description
Attendant Barge-In allows the attendant to establish a connection with
any trunk in the system to verify that the trunk is in working order. When
Barge-In is active, a 256 millisecond burst of tone is sent to the connected
parties every six seconds to indicate the presence of the attendant.
Operating parameters
Barge-In can only be used for trunks with Warning Tone Allowed (WTA)
Class of Service. All parties connected to the trunk when the attendant
attempts to barge in must have WTA Class of Service.
If equipped, the Barge-In key must be assigned to key 1 of the console
flexible feature strip.
The system must be equipped with a conference loop.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.