Nortel Networks NN43001-106 - Manual (Page 220)

220 Attendant Announcement
Announcements provided by XCT/TDS tone service
LD 56 - Configure the Attendant Announcement table.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE AANN Attendant Announcement data block.
CUST xx Customer number, as defined in LD 15
TBL 0-31 Announcement table number.
- NIPR Nightstation Announcement Priority.
(NO)
YES
ANNS is not provided on each call to the night station
ANNS is provided on each call to the night station.
- ANQU (NO) Announcement is not provided on calls in the attendant queue
or night service queue only.
YES Announcement is provided on calls in the attendant queue or
night service queue only.
- ANAT aaa Announcement when terminating to the Attendant, where:
aaa= SRC1 - SRC8 source entry of the appropriate tone table.
- ANNS aaa Announcement when terminating to night station, where:
aaa = SRC1 - SRC8 source entry of the appropriate tone table.
- ANFA aaa Announcement when Call Forward No Answer to Attendant,
where:
aaa = SRC1 - SRC8 source entry of the appropriate tone table.
- ANFB aaa Announcement when Call Forward Busy to Attendant, where:
aaa = SRC1 - SRC8 source entry of the appropriate tone table.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.