Nortel Networks NN43001-106 - Manual (Page 505)

Feature operation 505
portion of the connection matrix is used to determine the processing on the
XEM/XUT side of the call and on the B34 port type side of the call. When a
decision is made, it is communicated using a B34 message.
Feature packaging
B34 Dynamic Loss Switching requires the following packages:
• International Supplementary Features (SUPP) package 131
• Limited Access to Overlays (LAPW) package 164
• Intelligent Peripheral Equipment (XPE) package 203
Feature implementation
The base and alternate tables are configured in LD 97. The connection
matrix is selected in LD 15.The craftsperson must have an authorized
password to configure the loss tables. Printing of the tables can be
performed without the password.
The system must be configured with the Limited Access to Overlays (LAPW)
package, and the craftsperson must have an authorized password.
LD 97 - Configure a loss plan table.
Prompt Response Description
REQ CHG Change loss plan table.
TYPE
...
LOSP The type branch for the system loss plan table. Enter
LOSP.
Feature operation
No specific operating procedures are required to use this feature.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.