Nortel Networks NN43001-106 - Manual (Page 425)

Feature implementation 425
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. LD 15 – Configure the ANI customer data.
2. LD 16 – Configure the Centralized Automatic Message Accounting
(CAMA) route data.
3. LD 14 – Configure the Centralized Automatic Message Accounting
(CAMA) trunk data.
4. LD 28 – Configure the Route selection data for ANI calls.
5. LD 16 – Configure the Centralized Automatic Message Accounting
(CAMA) route data.
LD 15 - Configure the ANI customer data.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: ANI Automatic Number Identification.
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
ANAT xxx...x ANI billing number for attendants making ANI calls. (The total
number of digits in ANAT and ANLD cannot exceed seven
digits.)
ANLD xxx...x ANI listed DN for billing purposes (0-5 digits). (The total number
of digits in ANAT and ANLD cannot exceed seven digits.)
LD 16 - Configure the Centralized Automatic Message Accounting (CAMA) route data.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System and Media Gateway 1000B.
TKTP CAM CAA SIGL = Bel, NT4, or NT5.
SIGL = Bel.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.