Nortel Networks NN43001-106 - Manual (Page 240)

240 Attendant Break-In
Multiple Appearance Directory Number Redirection Prime
The attendant may get a busy tone if all the telephones with the required
DN are busy. Break-In permits the attendant to break in to the connection
with the least restricted TN. Where more than one TN exists that meets this
criterion, Break-In chooses the one at the bottom of the DN block.
Multi-Party Operations - Three-Party Service
Break-In is not allowed to the party receiving the patience tone or the
misoperation ringback.
Multi-Party Operations Enhancements
Attendant Break-in is not allowed to a connection in which a party is
receiving Patience Tone or recall of misoperation ringback.
On Hold on Loudspeaker
It will not be possible to Break-in into a call on loudspeaker as it is effectively
on hold at the telephone.
Override
When one telephone has overridden an existing call to establish a
conference call, Break-In is temporarily denied. The attendant is notified
by the override tone.
Priority Override
Telephones with a toll operator break-in call cannot be overridden. Overflow
tone is returned to telephones attempting Priority Override.
Override, Enhanced
Telephones with a toll operator break-in call cannot be camped on to or
overridden. Overflow tone is returned to telephones attempting either
Forced Camp-on or Priority Override.
Periodic Camp-on Tone
The Periodic Camp-On Tone has precedence over Break-In intrusion tone.
Semi-Automatic Camp-On
The attendant can Break-In to an established call and apply Semi-automatic
Camp-On to the desired party. The attendant may press the SACP key
before or after the Break-In.
Source Included when Attendant Dials
The operation of the Break-In feature is not affected, except that the source
receives busy tone before the attendant presses the Break-In (BKI) key.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.