Nortel Networks NN43001-106 - Manual (Page 390)

390 Automatic Answerback
Calls presented to DNs other than the PDN, or calls presented to the
PDN when active on another DN, will not receive Automatic Answerback
treatment.
Automatic Answerback can be provided as a Class of Service or on a
key/lamp pair. You cannot assign both in service change.
Feature interactions
Automatic Line Selection
Automatic Answerback operates only on the Prime DN (key zero) and has
no interrelation with Incoming Ringing/Non-Ringing Line Selection.
Called Party Disconnect Control
Incoming calls on a trunk with Called Party Disconnect Control Allowed
that terminate on a telephone with Handsfree Answerback are answered
automatically. They are not disconnected automatically, however, when the
calling party goes on-hook.
Collect Call Blocking
The Automatic Answerback (AAB) feature, when assigned to a Meridian 1
proprietary telephone, allows any incoming call to a single-appearance
Prime Directory Number (PDN) to be answered automatically. If an incoming
DID or CO call terminates on a telephone with the AAB feature enabled,
the call is automatically answered after one ring. If the telephone has a
CCBA Class of Service, the CCB answer signal is provided in the place of
the regular answer signal.
Hot Line
The Automatic Answerback feature is fully compatible with a two-way Hot
Line key assigned as the Prime DN.
Message Center
If a telephone is in the Automatic Answerback mode, incoming calls are
not routed to the Message Center.
Feature packaging
Automatic Answerback (AAB) package 47 has no feature package
dependencies.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. LD 11 – Assign Automatic Answerback as a Class of Service to M2317
or M2616 telephones.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.