Nortel Networks NN43001-106 - Manual (Page 219)

Feature implementation 219
Feature packaging
The Attendant Announcement feature introduces Attendant Announcement
(AANN) package 384.
This feature also requires the following existing packages:
• Recorded Announcement (RAN) package 7 (if RAN Announcements
are used)
• Attendant Overflow Position (AOP) package 56 (if AOP is used)
• Flexible Tones and Cadences (FTC) package 125
• Attendant Forward No Answer (AFNA) package 134 (if AFNA is used)
• Network Attendant Service (NAS) package 159 (if used over MCDN
network)
• Message Intercept (MINT) package 163
• Attendant Alternative Answering (AAA) package 174 (if AAA is used)
• Recorded Announcement Broadcast (RANBRD) package 327 (if the
broadcast facility of the RAN trunk is used)
Feature implementation
Task summary list
Use the following to configure announcements provided by XCT/TDS tone
service:
1. LD 56 – Configure the Attendant Announcement table.
2. LD 56 – Configure tone announcement for Small Systems and CS
1000S systems.
3. LD 56 – Configure tone announcement for Large Systems.
4. LD 16 – Enable the Attendant Announcement.
Use the following to configure announcements provided by RAN services:
1. LD 16 – Configure RAN routes for Attendant Announcement.
2. LD 56 – Configure the Attendant Announcement table for RAN usage.
3. LD 16 – Configure Route Data Block for Attendant Announcement.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.