Nortel Networks NN43001-106 - Manual (Page 401)

Feature interactions 401
Conference
If a call is established on the conference key, pressing any DN key puts
the Conference call on hold. The user must press the conference key to
reestablish the call. Pressing the conference key a second time completes
the Conference call.
Digit display
Digit display is the same with automatic hold as it was with manual hold.
Display Overflow on Calling Number Identification
If the number of Calling Number Identification (CNI) digits exceeds the
capacity of the digit display, the active DN key can be pressed to show the
remaining digits. If the active DN key is pressed again, the established call
is placed on hold. The established call can be placed on hold, before the
digits are displayed, by pressing any other DN key.
Enhanced Hotline and Hotline
No Hold Conference
On proprietary sets pressing a designated Hotline key places an outgoing
call to a pre-defined DN. Pressing any idle DN key or pressing the hotline
key a second time can place this call on hold. The user can use the same
DN key they used to put the call on hold to make an outgoing call or to
answer an incoming call.
On a two-way Hotline key, the incoming call is held if the hotline key is
pressed twice or if an idle DN key is pressed. Pressing the Release key
while on an active Hotline call terminates the call.
The Conference-Hot Line (CH) key does not support Automatic Hold.
Group Call (GRC)
Only the originator of a Group Call (GRC) can put the Group Call on hold.
Hold Key
A set configuration with Automatic Hold Allowed Class of Service can still
place calls on hold using the Hold key.
Individual Hold Enhancement
When a Multiple Appearance Directory Number (MADN) call is put on hold
on proprietary sets, the Hold key lamp flashes at this user’s set, while
a slow flicker is shown at all other appearances of the same DN. With
more than one single line MADN (SCR/SCN/HOT/PVR/PVN) active on a
conference call, the user is put on hold either by pressing the Hold key, or
with Automatic Hold feature enabled, the user can press the active single
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.