Nortel Networks NN43001-106 - Manual (Page 281)

Feature operation 281
LD 15 – Configure the Attendant Cleaning during Night Service feature
at the ACNS prompt.
LD 15 - Configure the Attendant Cleaning during Night Service feature at the ACNS prompt.
Prompt Response Description
REQ: NEW
CHG Add new data.
Modify existing data.
TYPE: MPO Multi-Party Options
...
MPOP YES Multi-Party Operations options.
...
- FMOP YES Flexible Misoperation Parameters.
- - RCY2 ...
- - ACNS Attendant Clearing during Night Service.
(NO)
ALL
EXT Attendant will not be cleared (the default).
All calls will be routed to the Night DN.
External calls will be routed to the Night DN, while internal calls
will be disconnected.
Previously defined value not changed, or set to default if
response to REQ was NEW.
ATTENTION
This overlay is modified to output the Attendant Clearing during Night Service
(ACNS) prompt as part of the MPO group of prompts. The ACNS prompt will only
appear if the MPO package is equipped and the response to both MPOP and
FMOP is YES. The ACNS prompt will accept a response of either NO, ALL, EXT
or a carriage return ().
Feature operation
A customer is put into Night Service manually, by pressing the NITE key on
the attendant console or having all attendant consoles activate Position
Busy, or automatically, by the Scheduled Access Restrictions (SAR) or
Attendant Forward No Answer (AFNA) features. When Night Service is
activated, all calls or selected calls associated with the attendant will be
given treatment according to the feature option defined in the Customer
Data Block (LD 15) as part of the Multi-Party Operations (MPO) options.
The sections following describe the treatments given to different call types.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.