Nortel Networks NN43001-106 - Manual (Page 466)

466 Automatic Wake Up
Multiple Wake Up FFCs require Flexible Feature Codes (FFC) package
number 139.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. LD 16 – Define the RANF route.
2. LD 16 – Define the RAN1 route.
3. LD 16 – Define the RAN2 route.
4. LD 14 – Define the trunk for RANF.
5. LD 14 – Define the trunk for RAN1.
6. LD 14 – Define the trunk for RAN2.
7. LD 15 – Enable Automatic Wake Up in Customer Data Block.
8. LD 10 – Set language and CCOS for analog (500/2500 type) telephones
(on a per TN basis).
9. LD 11 – Set language and CCOS for Meridian 1 proprietary telephones
(on a per TN basis).
10. LD 12 – Allow access to AWU from attendant consoles.
LD 16 - Define the RANF route.
Prompt Response Description
REQ NEW
CHG Add new data.
Change existing data.
TYPE RDB Route Data Block.
CUST xx Customer number, as defined in LD 15
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System and Media Gateway 1000B.
TKTP AWR AWU RAN route.
RTYP AUD Audichron recorder.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.