Nortel Networks NN43001-106 - Manual (Page 451)

Feature operation 451
Prompt Response Description
- USER CSC Customer service change (Automatic Set Relocation)
messages.
CUST xx Customer number, as defined in LD 15
LD 32 - Query information
IDU l s c u Prints telephone’s information.
Use this command to query information about your terminal type, NT code, color, release number,
and unique serial number. This command works only for Meridian Modular Terminals.
LD 50 - Remove an entry in the relocation table.
Prompt Response Description
REQ OUT CHG Remove, or change an entry in the relocation table.
TYPE MTRT Modular Telephone Relocation Table.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B where
c = card and u = unit.
SER xxxxxx Serial number (prompted for changes only).
NTCD xxxxxxx NT code (for changes only).
COLR xx Color (prompted for changes only).
RLS xx Release (prompted for changes only).
LD 21 - Print information in the relocation table.
Prompt Response Description
REQ: PRT Print.
TYPE: SRDT Set relocation data.
Feature operation
To use Automatic Set Relocation:
Step Action
1 Lift the handset.
2 Enter the relocation code (either SPRE 81 or the Flexible Feature
Code).
3 Enter the security code. The default is 0000.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.