Feature implementation, Task summary list – Nortel Networks NN43001-106 User Manual
Page 84
84
10/20 Digit ANI on 911 Calls
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
"LD 16 – Configure the M911 ANI format." (page 84)
LD 15 - Set the Pseudo Automatic Number Identification (PANI) prompt to YES to display PANI.
Prompt
Response
Description
REQ:
CHG
Change existing data.
TYPE:
ANI
Change Automatic Number Identification options.
CUST
Customer number
0-99
Range for Large System and CS 1000E system.
0-31
Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
....
....
PANI
YES
(NO)
Display.
Do not display Pseudo Automatic Number Identification
(default).
Note: When PANI is set to NO (Do not display PANI), the PANI
will display briefly, then disappear.
....
....
LD 16 - Configure the M911 ANI format.
Prompt
Response
Description
REQ
CHG
Change existing data.
TYPE
RDB
Route data block.
CUST
xx
Customer number, as defined in LD 15
ROUT
Route number
0-511
Range for Large System and CS 1000E system.
0-127
Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
DES
x...x
Designator field for trunk (0-16 character alphanumeric).
TKTP
DID
Direct Inward Dialing trunk data block.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106
01.04
Standard
Release 5.0
27 July 2007
Copyright © 2007, Nortel Networks
.