Nortel Networks NN43001-106 - Manual (Page 107)

Feature operation 107
Prompt Response Description
SSU xxxx System Speed Call User and list number.
Enter X SSU to remove.
PHD Allow Permanent Hold.
Enter X PHD to remove.
Feature operation
Call Forward All Calls
Case 1: FFC active, CFW not active
On a telephone with Flexible Feature Codes implemented, but without Call
Forward currently active, use these steps to activate the feature:
Step Action
1 Lift the handset and dial SPRE + 74. You hear dial tone.
2 Dial the DN where you want calls to be forwarded. The dial tone
disappears.
3 Hang up to complete the activation.
—End—
To deactivate Call Forward, follow these steps:
Step Action
1 Lift the handset and dial SPRE + 74. You hear dial tone.
2 Hang up to complete deactivation.
—End—
Case 2: FFC not active, CFW not active
On a telephone without Flexible Feature Codes or Call Forward currently
Active, use these steps to activate the feature:
Step Action
1 Lift the handset and dial #1. You hear dial tone.
2 Dial the DN where you want calls to be forwarded. The dial tone
disappears.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.