Feature operation – Nortel Networks NN43001-106 User Manual
Page 271

Feature operation
271
Prompt
Response
Description
c u
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
CLS
(WTA) WTD
Allow or deny warning tone.
LD 11 - Allow/deny Warning Tone Class of Service for proprietary telephones.
Prompt
Response
Description
REQ:
CHG
Change existing data.
TYPE:
a...a
Telephone type. Type ? for a list of possible responses.
TN
Terminal Number
l s c u
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
CLS
(WTA) WTD
Allow or deny warning tone.
LD 14 - Allow/deny Warning Tone Class of Service for trunks.
Prompt
Response
Description
REQ
CHG
Change existing data.
TYPE
COT DID FEX
RAN TIE WAT
Trunk type.
TN
Terminal Number
l s c u
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
CLS
(WTA) WTD
Allow or deny warning tone.
Feature operation
To verify a busy DN, follow these steps:
Step
Action
1
Select an idle loop key.
2
Press Busy Verify.
3
Dial the DN of the station.
If the DN is idle, press Signal Source to ring the station.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106
01.04
Standard
Release 5.0
27 July 2007
Copyright © 2007, Nortel Networks
.