Nortel Networks NN43001-106 - Manual (Page 246)

246 Attendant Break-In Busy Indication and Prevention
2 = Station is busy on an internal call, or station is busy on an on-net call.
3 = Station is busy on a non-established call; for instance, dialing, ringing, or
announcement. Or, station is busy on a conference call.
4 = Station is in line lockout.
In an ISDN Primary Rate Interface (PRI) environment, the mode digit
indicates one of the following states:
1 = Station is busy on an off-net call, or involved in a conference call.
2 = Station is busy with on-net call, and is not involved in a conference call.
3 = Station is busy on a non-established call; for instance, dialing, ringing, or
announcement.
4 = Station is in line lockout.
Break-in Prevention
A Break-in to External Call Denied (BIXD) option is provided to the customer
which, if selected, temporarily denies Break-in to a party involved in an
external call. This applies to both pre-dial and post-dial Break-in operations.
Operating parameters
The same limitations apply as for the Attendant Break-In and Network
Attendant Service (NAS) Break-In features.
Feature interactions
All of the same feature interactions apply as for the Break-in and Network
Attendant Service Break-in features.
The appropriate busy indication is given to a Line Lockout Set which has
been broken in on.
Feature packaging
Attendant Break-In Busy Indication and Prevention requires Attendant
Break-in/Trunk Offer (BKI) package 127.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.