Nortel Networks NN43001-106 - Manual (Page 376)

376 Autodial
Three Wire Analog Trunk - Commonwealth of Independent States (CIS)
Autodial on a E3W trunk will fail for toll calls. The reason is that E3W
trunks do not wait for the ANI request from the Public Exchange/Central
Office, which is expected to appear after the toll access code is dialed. The
Public Exchange then does not accept the call due to failure to receive
ANI information.
User Selectable Call Redirection
User Selectable Redirection Allowed (USCR) does not support Autodial;
Autodial cannot be used to dial all or part of the digits for USCR
programming.
Feature packaging
Optional Features (OPTF) package 1 includes Autodial and has no feature
package dependencies.
To implement Autodial with Authorization Code, the following packages
are required:
• Charge Account/Authorization Code Base (CAB) package 24, or
Basic Authorization Code (BAUT) package 25, or
Network Authorization Code (NAUT) package 63.
• Optional Features (OPTF) package 1, or
System Speed Call (SSC) package 34, or
Network Speed Call (NSC) package 39.
The following packages are required for Autodial FFCs:
• Flexible Feature Codes (FFC) package number 139, and
• Background Terminal Facility (BGD) package 99.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. LD 11 – Assign Autodial key for proprietary telephones.
2. LD 12 – Assign Autodial key for M2250 attendant console.
3. LD 15 – Define Autodial Delay in the Customer Data Block.
LD 11 - Assign Autodial key for proprietary telephones.
Prompt Response Description
REQ: CHG Change.
TYPE: a...a Telephone type. Type ? for a list of possible responses.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.