Nortel Networks NN43001-106 - Manual (Page 449)

Feature implementation 449
9. LD 21 – Print information in the relocation table.
LD 15 - Assign the Automatic Set Relocation security code.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: FTR Features and options.
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System and Media Gateway 1000B.
- SRCD xxxx X Automatic Set Relocation security code; default is 0000; X
removes security code.
LD 10 - Enable/disable line circuits for Automatic Set Relocation.
Prompt Response Description
REQ: new out Configure Automatic Set Relocation.
TYPE: cardslt 500/2500 line circuit for Automatic Set Relocation.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B where
c = card and u = unit.
LD 11 - Enable/disable line circuits for Automatic Set Relocation.
Prompt Response Description
REQ: new Add new data.
TYPE: cardmlt Digital line circuit for Automatic Set Relocation.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u Format for Small System and Media Gateway 1000B where
c = card and u = unit.
LD 12 - Gather data for each line circuit to be used as a supplementary power source.
Prompt Response Description
REQ CHG Change existing data.
TYPE PWR Digital line circuit for supplementary power.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.