Nortel Networks NN43001-106 - Manual (Page 461)

Feature description 461
Language 0 must be defined. If a specific language AWR is not accessible
at wake up time, the corresponding primary or secondary default language
routes (RAN1 and RAN2) are used.
On a Background Terminal, a customer can define a two-character language
identifier to reference the languages. For example, the customer may define
Language 0 as EN (English), Language 1 as SP (Spanish), and Language 2
as GR (German). For details on implementing BGD terminal commands,
refer to Hospitality Features: Description and Operation (553-3001-353).
Unanswered Automatic Wake Up calls recall to the attendant if the attendant
recall option is on. Upon a recall, the room’s language identifier is displayed
after the Call Party Name Display (CPND) fields on the attendant console.
Multiple Wake Up Flexible Feature Codes
Multiple Wake Up allows up to four wake-up calls to be entered using a
Flexible Feature Code (FFC), and allows those calls to be repeated daily,
if desired, by entering a separate FFC. The time is in a four-digit 24-hour
format (H1 H2 M1 M2). To activate Repeat Multiple Wake Up, the user
dials "MWRA H1 H2 M1 M2".
If a wake-up time has already been entered using the standard Automatic
Wake Up Activate (AWUA) FFC, only three other multiple wake-up times
may be entered.
To deactivate a single wake-up time, the user enters "MWUD H1 H2 M1
M2", where MWUD is the Multiple Wake Up Deactivate FFC. To deactivate
all wake-up times, the user enters "MWUD#". The general Deactivate
(DEAF) FFC does not apply to Multiple Wake Up.
If the MWUD FFC is entered again after all wake-up times have been
deactivated, confirmation tone is given. If the MWUD FFC is entered
again to deactivate a wake-up time that has been already deactivated,
overflow tone is given. If an attempt is made to enter an existing wake-up
time, confirmation tone is given. If an attempt is made to enter an existing
wake-up time as a repeat wake-up time, then that time is activated as a
repeat wake-up time. If an attempt is made to enter an existing repeat
wake-up time as a single wake-up time, then that time is activated as a
single wake-up time. In both cases, confirmation tone is given.
To verify a Multiple Wake Up time, the user dials "AWUV H1 H2 M1 M2"
(where AWUV is the existing Verify Automatic Wake Up FFC).
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.