Nortel Networks NN43001-106 - Manual (Page 406)

406 Automatic Line Selection
With Incoming Non-Ringing Line Selection enabled, when the user
goes off-hook, the telephone scans the DN lines and answers any
unanswered incoming calls that appear but do not ring at that telephone.
• Outgoing Line Selection
With Outgoing Line Selection enabled, when the user goes off-hook,
the telephone scans the DN keys for an idle line. If a line is idle, it is
selected and dial tone is returned.
• Prime Line Selection
When the handset is lifted, the system processes any manual, incoming,
or outgoing line selections. If no line is selected by one of these modes,
a designated Prime Line (the DN on key 0) is selected.
Operating parameters
The Automatic Line Selection feature is available on Meridian 1 proprietary
telephones only.
The user determines which line is in use by observing lamp state changes.
Feature interactions
Audible Message Waiting
The Audible Message Waiting signal is given if there is a message waiting
on whatever line is selected by Outgoing Line Selection.
Automatic Call Distribution (ACD)
An ACD DN is not selected by automatic Incoming Non-Ringing and
Outgoing Line Selection. It is selected by Incoming Ringing Line Selection.
Automatic Answerback
Automatic Answerback operates only on the Prime DN (key zero) and has
no interrelation with Incoming Ringing/Non-Ringing Line Selection.
Automatic Redial
Manual Line Selection, Outgoing Line Selection or Prime Line Selection is
interpreted as accepting the Automatic Redial (ARDL) by the calling party.
Call Waiting
A call on the Call Waiting key is not selected.
Dial Intercom
A Dial Intercom DN is selected by Incoming Ringing Line Selection and
Outgoing Line Selection.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.