Nortel Networks NN43001-106 - Manual (Page 230)

230 Attendant Barge-In
Feature interactions
Automatic Redial
Attendant Barge In is not allowed to a trunk that is currently used for the
Automatic Redial call redialing. This is done to avoid creating a conference
when the tone detector is involved.
Call Forward/Hunt Override Via Flexible Feature Code
Using Call Forward/Hunt Override Via FFC after activation of Barge-in, Busy
Verify or Break-in is not allowed. Attempts will be canceled and overflow
tone will be returned.
Using post-dial Break-in after dialing the Call Forward/Hunt Override FFC is
possible after encountering a busy telephone, if Break-in is enabled.
Call Page Network Wide
For external Call Page Network Wide (PAGENET) uncontrolled calls,
Attendant Barge-In is blocked at the Paging node, per existing operation.
For external PAGENET controlled calls, Attendant Barge In is blocked at
both the originating and Paging node.
Charge Account and Calling Party Name
A charge account number cannot be entered when Attendant Barge-In or
Attendant Busy Verify is active. Barge-In cannot be used to connect to a
trunk after an account number has been entered.
China - Attendant Monitor
When China (CHINA) package 285 is equipped, the normal operation
of Barge-In changes slightly. The repeatable tone can be configured with
the (TOA)/TOD option.
If an attendant is monitoring a trunk, a second attendant defined at the
same customer location is blocked from Barging In to any trunk involved
in the monitored call.
If an attendant is Barged-In with a trunk, a second attendant defined at the
same customer location will be blocked from monitoring any party involved
in the monitored call.
Conference
Conference Control cannot be activated if an attendant has used Barge-In
or during a conference that involves a trunk.
End-to-End Signaling
While in the Attendant Barge-In mode, the console cannot enter Attendant
End-to-End Signaling mode.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.