Malicious call trace - enhanced, Speed call, Feature packaging – Nortel Networks NN43001-106 User Manual
Page 384: Feature implementation, Task summary list
384
Autodial Tandem Transfer
Malicious Call Trace - Enhanced
Enhanced Malicious Call Trace implements the ability to send a call trace
request to the CO and provides the possibility to record the call using a
recorder. This feature also uses the Centrex/Trunk Switchhook Flash
feature; the same enhancement applies to the ATX feature.
Speed Call
The Speed Call key cannot be used after THF or during an established call
to send digits out to the far site; it can only be used during the dialing stage.
Feature packaging
Autodial Tandem Transfer (ATX) is package 258.
The following packages are also required:
•
End-to-End Signaling (EES) package 10
•
Trunk Hook Flash (THF) package 157
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
LD 11 – Define THF and ADL keys for Meridian 1 proprietary telephones.
2.
LD 14 – Define THF Class of Service THFA for the trunk.
3.
LD 15 – Define feedback tone when ADL digits are sent out.
4.
LD 16 – Set the duration for Centrex/Trunk Switchhook Flash.
LD 11 - Define THF and ADL keys for Meridian 1 proprietary telephones.
Prompt
Response
Description
REQ:
CHG
Change existing data.
TYPE:
a...a
Telephone type. Type
?
for a list of possible responses.
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
CLS
...
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106
01.04
Standard
Release 5.0
27 July 2007
Copyright © 2007, Nortel Networks
.