Nortel Networks NN43001-106 - Manual (Page 129)

Feature implementation 129
Series Calls
Series Calls cause a source call that has been extended to a local
destination party to be recalled to the attendant when the destination party
hangs up. In activating the AC15 Timed Reminder Recall, the called party is
not local. Therefore, the Series Calls feature is not applicable.
Slow Answer Modification (SLAM)
With the AC15 Timed Reminder Recall feature, if SLAM is allowed, when
the attendant answers an AC15 recall the destination party is disconnected
and the AC15 TIE trunk is released.
Feature packaging
The AC15 Recall (ACRL) package 236 must be equipped to activate the
AC15 Timed Reminder Recall feature.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1. "LD 15 – Set the Slow Answer Recall timer at the RTIM prompt." (page
129)
2. "LD 16 – Define a TIE route and telephone ATRR option." (page 129)
3. "LD 14 – Define an AC15 TIE trunk on an XFEM card." (page 130)
LD 15 - Set the Slow Answer Recall timer at the RTIM prompt.
Prompt Response Description
REQ: CHG Change.
TYPE: TIM Timers Data Block.
CUST Customer number
0-99 Range for Large System and CS 1000E system.
0-31 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
...
- RTIM xxx yyy zzz xxx = timer in seconds for the Slow Answer Recall and the
AC15 Timed Reminder Recall.
yyy = timer in seconds for Camp-on Recall.
zzz = timer in seconds for Call Waiting Recall.
LD 16 - Define a TIE route and telephone ATRR option.
Prompt Response Description
REQ NEW New.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.