Nortel Networks NN43001-106 - Manual (Page 375)

Feature interactions 375
Activation of Autodial when BNR is active deactivates BNR.
China Number 1 Signaling Enhancements
Delay Digit Outpulsing will be denied when dialing is done by way of Autodial.
Dial Intercom
The Dial Intercom code can be dialed using Autodial or Speed Call.
Direct Private Network Access
If Autodial is programmed with a valid Authcode for Authcode Last
component of Direct Private Network Access followed by an octothorpe "#",
the existing Authcode Last operation will reject the Authcode as an invalid
Authcode. If Authcode Last Retry is defined, the caller will be prompted for
the Authcode again.
Flexible Hot Line
Enhanced Hot Line
Flexible Hot Line and/or Enhanced Hot Line are mutually exclusive with
the Autodial feature.
Intercept Computer Dial from Directory
It is possible to press the Autodial (ADL) key (in which some digits are
stored such as an Electronic Switched Network (ESN) code or Flexible
Feature Code (FCC)), and then dial a DN from the Intercept Computer. The
DN will then be stored on the ADL key.
Last Number Redial
A number dialed using Autodial will become the Last Number Redial number
on all telephones, except the M2317.
Station Specific Authorization Code
The Station Specific Authorization Code (SSAU) feature treats stored
autodial numbers as if they were entered at the telephone.
Speed Call Delimiter
An octothorpe (#) is required as a delimiter following an authorization code
if an Electronic Switched Network (ESN) and dialed number are stored as
part of the speed call or autodial key. If an octothorpe (#) is not entered then
the user receives a fast busy tone. If the MSCD = YES, then the end of
dial delimiter must be programmed to something other than an octothorpe
(#) in LD 15.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.