Nortel Networks NN43001-106 - Manual (Page 473)

Feature operation 473
Press the Release (Rls) or PDN key while programming a wake up request
to abort the wake up request. Any previously defined wake up time will
remain.
Display telephones If the time interval chosen for the wake up call is full,
the system searches for and displays the next available time. If the system
cannot find another time, the display shows four dashes (– – – –), and the
Wake Up indicator remains flashing. If the system finds another time, the
guest has three options:
• To accept the new wake up time, press Wake Up.
• To reject the new wake up time and enter another one, dial the new
wake up time and press Wake Up to validate the new time.
• To abort the wake up time, press Rls or the Prime DN key (PDN).
To cancel a wake up request, follow these steps:
Step Action
1 Press Wake Up.
The indicator flashes.
2 Dial the octothorpe (#).
3 Press Wake Up.
The indicator goes off.
—End—
To check a wake up request on a telephone with display, follow these steps:
Step Action
1 Press Wake Up.
The indicator flashes and the current wake up time appears on
the display. If no wake up time is programmed, the display shows
a dash (–).
2 Press Wake Up.
The indicator lights if a wake up time is set.
—End—
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.