Nortel Networks NN43001-106 User Manual
Page 426
426
Automatic Number Identification
Prompt
Response
Description
SIGL
BEL
NT4
NT5
Bell method signaling.
ITT-North NT400 signaling (only if TKTP = CAM).
ITT-North NT500 signaling (only if TKTP = CAM).
FORM
M1A
M2B
M3C
For BEL, NT4, or NT5 (NT4 and NT5 not applicable if TKTP =
CAA).
For BEL, NT4, or NT5 (NT4 and NT5 not applicable if TKTP =
CAA).
For NT5 (only if TKTP = CAM).
ICOG
OGT
Outgoing.
ACOD
xxxx
Access Code.
ID
0-9
Identification digit for CAMA routes (for BEL).
CAT
00-99
Category digits for CAMA routes (only if TKTP = CAM). For
NT4 and NT5.
STRK
(NO) YES
(Disable) enable super trunk group feature (Bell method
signaling only).
SPTO
(NO) YES
7- to 10-digit, or 3-digit outpulsing for ANI calls.
ANKP
(NO) YES
(Do not) suppress KP signal on ANI calls.
CNTL
(NO) YES
(Do not) allow changes to timers.
- TIMR
ATO 128–65,408
ANI timeout timer in milliseconds (default is 4,992).
- ANDT
(NO) YES
(Do not) provide ANI dial tone.
LD 14 - Configure the Centralized Automatic Message Accounting (CAMA) trunk data.
Prompt
Response
Description
REQ
NEW
CHG
Add new data.
Change existing data.
TYPE
CAM
CAA
CAMA trunk.
CAMA-ANI trunk (SIGL = BEL in LD 16).
TN
l s c u
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
c u
Format for Small System and Media Gateway 1000B where
c = card and u = unit.
XTRK
XUT
XEM
EXUT
Extended Universal Trunk card.
Extended E & M trunk card.
Enhanced Extended Universal Trunk.
...
CUST
xx
Customer number, as defined in LD 15
...
RTMB
Route number and Member Number
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106
01.04
Standard
Release 5.0
27 July 2007
Copyright © 2007, Nortel Networks
.